Injector Diagnostics & Maintenance Services
What is our Process? Here is what we do.
1)
First you send us your injectors. Fill out the Service Request form and ship us your injectors.
2)
Once we receive your injectors we will visually inspect them for damage or other issues and then test resistance, current, inductance and check for shorts.
3)
Then we clean the fuel injector externally using a parts washer to remove any dirt, grease or debris to prepare it for the next step.
4)
Then we place the fuel injector on the ASNU cleaning machine and each injector is leak tested and the flow rate and spray pattern is recorded. During this process, the dynamic/pulsed and static/wide open tests are performed.
5)
Each fuel injector is now disassembled by removing the pintle cap, filter basket and o-rings.
6)
Next our 3 step ultrasonic cleaning process is performed on the fuel injectors as they are pulsed to remove any dirt or grime followed by a high pressure back flush.
7)
The fuel injectors are now placed back on the ASNU cleaning machine and flow testing, leak testing and spray pattern is re-recorded.
8)
New pintle cap, filter basket and o-rings are installed on the fuel injector
9)
Once completed, a detailed test report is created and returned along with your fuel injectors that details the flow rates and spray pattern before and after cleaning. Also included in the test report is the system variance that details the static and pulsed variance of the injectors before and after cleaning.
Send us your injectors for service
It is easy to have us service your injectors. Just fill out our request form and in a day or two your injectors will be returned to you clean and functioning like new.
Click the button below to get started.